ES-1ASP
ES-4
ES-4 is always used with a Control Unit (remote control), connected by cable to the Base (Switching Unit)
Base (Switching unit) with Wall Bracket installed and Controller
.
.
.
.
ES-4 with "N" connectors
ES-1A (ES-1ASP) with Remote Control
The Remote Control is optional
When used, the front panel is inactive
Remote control used – front panel disconnected
ES-1A / ES1-ASP
ES-1A Side view
ES-1A – requires 12Vdc from an external source (11V to 15V)
(up to 150 mA for ES-1A, up to 250 mA for ES-1ASP)
ES-1A / ES1-ASP REAR PANEL
ES-1A / ES-1ASP with "N" connectors
